You can buy furniture safety strap kits for about $10 a kit which will secure one bookshelf. If you need to secure many bookshelves buying one kit per bookshelf becomes expensive. Here’s how to make your own furniture safety straps and save money. With the process described below I spent about $50 and was able to secure 16 bookshelves with materials left over.
- Nylon webbing : Search ebay for
Black 10 Yards Nylon Heavy Webbing Strap 1 inch. This should return a number of sellers that will ship direct from China. I got mine from the seller lwf_1963 for $6.50 with free shipping. You can search that specific seller’s listing of nylon webbing with this advanced search. If you can’t find any from that specific seller just use the search terms and look for a cheap and trustworthy Chinese seller. The requirements are that the webbing be 1 inch wide or greater and that it’s a long enough roll to produce the number of straps that you need. Each strap is about 9″ long, each bookshelf takes 2 straps so 10 yards will make straps for 20 bookshelves.
- Grommets : Search ebay for
#1 Grommets Solid Brass 5/16" 100 Pack. I got mine from a seller that doesn’t appear to carry these anymore for $10.99 with free shipping. Specifically I got Tandy Leather brand grommets product number 1285-11. The requirements are that the grommets are #1 5/16″ grommets, where 5/16″ is the inner diameter and that it be a pack of enough grommets to do the number of bookshelves that you need. Each strap uses 3 grommets, each bookshelf uses 2 straps for a total of 6 grommets per bookshelf. A pack of 100 grommets will do 16 bookshelves.
- Grommet setter with anvil : You’ll need a grommet setter to attach the grommets to the nylon webbing. I got a 5/16″ Tandy Leather brand grommet setter product number 8097-03. I got this setter on ebay for $11.99 plus $2.13 shipping from ebay gwaynecraft2009 and you can see his listing for this with this advanced search. The only requirement of this setter is that it be designed for 5/16″ #1 grommets.
- Lag bolts : You’ll need one lag bolt for each strap or 2 lag bolts for each bookshelf. The lag bolts you’ll need are 1/4″ x 2″ full thread lag bolts, ideally with a hex head, ideally 3/8″ hex head. I used Spax Powerlags 1/4 x 2″ which I bought at Home Depot. You might be able to get away with a non-full-thread lag bolt if needed and you could go with 2.5″ long if needed. Looking online I should have ordered a box of lag bolts instead of buying them quantity 1 at Home Depot. Go to ebay and search for
1/4" x 2" lag bolt 50 and it looks like you can get a box of 50 for $10. You can also get lag bolts with washers which I didn’t do but might be beneficial. 50 lag bolts will do 25 bookshelves.
- Modified Truss Screw : The modified truss screw is what attaches the strap to the bookshelf. It’s a truss screw so that the had is large enough to cover the grommet opening. I used
#8 x 3/4" Zinc #2 Phillips Modified Truss Screw. The screw size is #8 with a thread count of 15 or 18 (#8-15 or #8-18). The length of the screw is 3/4″ but this should be based on the thickness of the tops of your bookshelves so that the screw doesn’t penetrate all the way through but comes as close as possible. For me 3/4″ was a good length. The “#2 Phillips” is the size of phillips head that fits with the screw. You need 2 screws per strap and 2 straps per bookshelf for 4 screws per bookshelf. You can get a 100 pack for about $10 on ebay. Search ebay for
modified truss #8 x 3/4"
- From the spool of nylon webbing cut enough straps for your bookshelves. Cut each strap to be about 9″ long. The straps that come in the commercial packages are 15″ long but I find you don’t need that much length. If your bookshelves sit far from the wall or there is thick molding keeping them away from the wall you might need longer than 9″. In all of my cases 9″ was perfect.
- Take one of the straps and identify 3 points on the 9″ strap. One about an inch away from one end, one an inch away from the other end and one in the middle. At each of these 3 points, take a razor blade and cut/puncture a small x in the strap. The x should be in the center of the 1″ strap width. The lines of the x should be about 5/16″.
- Take the male part of the grommet and push it through the first x you’ve cut. If it doesn’t fit, cut the x lines longer so it will fit. Once it’s pushed through use your razor blade to cut around the outside of the barrel of the male grommet piece to get rid of some of the nylon webbing material. It will come off as black fuzz. Once you’ve removed enough nylon webbing so you can see most of the barrel of the male grommet piece use the grommet setter and a female grommet piece and a hammer to set the grommet in the nylon webbing. If you’ve not cut away enough nylon webbing you’ll see some of it sticking out of the grommet (which isn’t the end of the world). If you’ve cut away too much nylon webbing the grommet won’t be secure in the nylon webbing and may come loose. Repeat this for all 3 x holes.
- Repeat steps 2 and 3 until you have enough straps
Installing The Straps
- With the bookshelf against the wall mark where the top of the bookshelf comes to on the wall
- Move the bookshelf away from the wall
- Using a studfinder find studs that line up somewhere behind the bookshelf, you’ll need to find 2
- Make two marks on the wall for each stud that you found and make them an inch or two below where the top of the bookshelf came to on the wall.
- Drill a pilot hole in the two marks with a 3/16″ drill bit of about 2″ in length
- Place one of the straps on the wall so that the grommet hole on one end of the strap is centered over the pilot hole. Using a 3/8″ hex bit in your drill or electric screwdriver, and one of the 1/4″ x 2″ lag bolts, attach the strap to the wall with the lag bolt. As you get near to sinking the lag bolt flush against the strap and wall, turn the strap so instead of hanging down below where you’re screwing the bolt in, it’s sticking straight up above the lag bolt. Finish securing the lag bolt to the wall. Do the same for the other pilot hole. You now have two straps attached to studs with lag bolts drooping down over your lag bolts.
- Move the bookshelf back into place. As you do this either with your hand or a ruler or something, flip the drooping strap up so that it rests on top of the bookshelf.
- Get up on a stool or chair so you can get to the top of the bookshelf. You should see the two straps laying on top of the bookshelf. Ensure the bookshelf is in the correct lateral (side to side) position against the wall and that it is the correct distance from the wall that you want. Take the first strap and with it taught against the top of the bookshelf, using a #2 phillips bit and a screwdriver or drill, drill a modified truss screw through one of the two grommets visible on the strap on top of the bookshelf. Do the same thing with the second grommet. Repeat this with the second strap’s two grommets.
- Test your work by pulling on the bookshelf to see how much play it has, if it twists side to side at all when you pull it and how much force it can stand.
Pro Tools First is a version of Avid Pro Tools which can be used for free. It’s limited in what it can do but for many applications is just fine. Pro Tools First and all of Avid’s line of digital audio software is create exclusively for Microsoft Windows and Apple Mac OSX, not for Linux. Pro Tools apparently doesn’t work in Wine.
Here’s how to run Pro Tools First under Linux using all free (as in beer) software. In my case I did this under Ubuntu 14.04 LTS but since there is no Linux package specific steps this should work on any major distro (e.g. RPM based CentOS systems).
- Download and install Oracle VirtualBox
- Download the Microsoft Windows 10 free virtual machine
- Download the Vista/Win7 (32/64 bits) Realtek AC’97 Driver which you’ll need to enable the VirtualBox virtual audio device in the Windows 10 guest
- Download the ASIO4ALL driver which will create a virtual audio device in the Windows 10 guest which Pro Tools First will recognize
- Import the Microsoft Windows 10 ova appliance that you downloaded into VirtualBox, creating a VirtualBox VM.
- Edit the settings of the newly created VirtualBox VM
- Change the number of CPUs dedicated to the VM from 1 to some greater number. This depends on how many CPU cores your host computer has. I dedicated 4 of my 8 cores to the VM. If you don’t set this high enough you’ll hear crackling and skipping in your audio (though the crackling/skipping won’t end up in the recording)
- Enable Audio support and chose the “AC97” audio driver, which should be the default.
- Create a shared folder so that you can make the downloaded AC97 and ASIO4ALL drivers available to the Windows 10 guest
- Maybe increase the video memory as mine started out with a value that was too low and VirtualBox complained. I don’t know that this step is required.
- Create a snapshot of your VM at this point, before your first boot but after tweaking the settings. I called mine “Before First Boot”. This is the snapshot you’ll go back to every 90 days as the Windows 10 license only works for 90 days.
- Start/Boot the Windows 10 VirtualBox VM
- Once it’s booted, reboot the VM with driver signature enforcement disabled by following these steps
- Click the Start menu and select Settings.
- Click Update and Security.
- Click on Recovery.
- Click Restart now under Advanced Startup.
- Click Troubleshoot.
- Click Advanced options.
- Click Startup Settings.
- Click on Restart.
- On the Startup Settings screen press 7 or F7 to disable driver signature enforcement.
- Set the display resolution of Windows to whatever you prefer as it defaults to 800×600 which is small
- Copy the AC97 drivers and ASIO4ALL drivers that you downloaded earlier from the shared folder to somewhere on the Windows 10 guest, for example the Desktop. Unzip the AC97 drivers into a folder.
- Open the Device Manager by running
devmgmt.msc or searching for it in the Start menu
- Find the Multimedia device with the exclamation mark over it in Device Manager, this is your virtual sound card
- Right click the device to update the drivers
- Select drivers from your local computer
- Navigate to the folder with the downloaded AC97 drivers
- When prompted if you’d like to load the drivers even though they’re not digitally signed, choose Yes.
- This should remove the exclamation mark in Device Manager and your virtual sound card should be working. You can test this by clicking the volume slider or playing an audio file and confirming you hear sound.
- Install ASIO4ALL
- If you forget this step you’ll see this error when you try to use Pro Tools First.
- Here’s a video showing how to work around this error and force Pro Tools First to reprompt you to select the ASIO4ALL device.
- Download and install Pro Tools First
- Launch Pro Tools First to confirm that it recognizes the ASIO4ALL virtual sound card.
- Take a VirtualBox Snapshot now that you have a working setup.
At this point you have a working Pro Tools Firs installation under Linux. Because you’re using a test VM of Microsoft Windows 10, you’ll need to redo these steps every 3 months (90 days) as the Windows 10 OS will stop working when the license runs out.
Here’s how you can increase the length of a session in Subsonic from the default of 30 minutes to something longer. In this example I’m increasing it to 2 weeks (20160 minutes).
sudo cp /usr/share/subsonic/subsonic-booter-jar-with-dependencies.jar /usr/share/subsonic/subsonic-booter-jar-with-dependencies.jar.orig
cat > webdefault.patch <<End-of-message
--- org/mortbay/jetty/webapp/webdefault.xml.orig 2014-06-11 10:06:12.000000000 -0700
+++ org/mortbay/jetty/webapp/webdefault.xml 2014-06-11 10:06:39.000000000 -0700
@@ -323,7 +323,7 @@
<!-- ==================================================================== -->
<!-- ==================================================================== -->
patch -p0 webdefault.patch && rm webdefault.patch
sudo service subsonic stop
sudo zip -r /usr/share/subsonic/subsonic-booter-jar-with-dependencies.jar ./
sudo service subsonic start
Starting next Monday I’ll begin my new job as a Cloud Security Engineer here at Mozilla! I’m really excited about this new role. I get to work with some super talented guys, many of whom I’m already good friends with. Julien, Guillaume, Michal, Tinfoil, Joe and some newer folks on the team that I’m getting to know. The job will involve bringing my development and operations background to bear and learning the ins and outs of security engineering.
Tomorrow will be my two year anniversary at Mozilla. I’ve worked in the operations team of our Cloud Services organization for most of that time (except for a short stint in the Identity Engineering group). I’ll still get to see and work with the guys on my old team all the time so there’s not much bitter in the bittersweetness of this change.
On to new challenges. Looking forward to it.
This morning was very foggy. In my daily ferry trip to work I learned a little about marine technology. I had assumed that, here in the 21st century, ships, like the ferry I ride to work, used some combination of high resolution GPS, radar, and maybe radio telemetry triangulation to identify where the ship was and where everything else in the bay was (other ships, the bridge pylons, etc.) I found out this morning that this must not be the case. As we trucked along, at a pretty good clip, across the bay with zero visibility of any kind, all of a sudden, the engines go from about 3/4 of full thrust to zero thrust. The whole boat lunges forward as we rapidly decelerate (due to water resistance) and out of the pea soup appears the massive bay bridge center anchorage dead ahead. The captain turns the boat sharply to the left and we swing around it and accelerate again. I’m glad our captain has good reflexes.
Later, upon landing and walking to work, the entire embarcadero was echoing with different ships fog horns being blasted.
It turns out that the two methods employed these days to deal with fog are slamming on the brakes if you see something ahead of you and making a ton of noise in hopes that someone else out there hears you and doesn’t crash into you. I thought we were living in the future, what happened?